SOA Interview Questions - Part 2

1. How to suppress ws-addressing header in SOA 11g?
By Default in SOA 11g, ws-addressing will be passed as part of the soap header in the Web service call for both Async and Sync process.To disable this feature the following properties needs to be used inside binding in composite.xml

Request:

<property name="oracle.soa.ws.outbound.omitWSA">true</property>

Response:

<property name="oracle.soa.addressing.response.enabled">false</property>


2. Why there is need to concrete and abstract wsdl?

Concrete wsdl is the client side rather run time wsdl which has the information like binding,endpoint where as abstract wsdl is the design wsdl. client wsdl is sufficient to proceed with the build since it removes the dependency that the service should be deployed and ready before starting the build. Also same abstract can be used for multiply binding with different concrete wsdl this removes the code redundancy.

Also in SOA perspective, abstract wsdl should be used rather than the concrete since when the process loads there will dependency across the calling services if the callee service didn't load  before the caller service then the service state will be unknown in SOA. To avoid this if we use abstract wsdl all the process loads normally and the concrete binding will be used only when it starts receiving the request.


3. What is local service invocation in SOA 11g?

By default SOA 11g tries to call the services through local service invocation by avoiding SOAP/HTTP instead it used java direct to call the services provided the service exist in the same soa infrastructure this will be checked based on the certain parameters like

    Server URL

    Front end URL

To disable this following properties can be used in the composite.xml


<property name="oracle.soa.local.optimization.force">false</property>

<property name="oracle.webservices.local.optimization">false</property>


4. Correlation vs WS-addressing?

WS-addressing- By default SOA engine uses this .The main advantage of this is developer don’t have to write the coding to correlate the message for the callback where as it has its dis-advantage that it adds the header to the SOAP header.

Correlation-This is used when the calling service don't support ws-addressing .Also this does not overhead the message since it used content from the message rather than adding some headers to the request.


5. What is Oracle SOA governance?

All the organization wants to get the greater or better benefit when they implement integration through SOA. Oracle SOA governance drives this by providing products like OER, OSR and EM Management pack for SOA

By using all these better SOA governance can be achieved to reach the SOA Maturity level by providing policies which needs to be followed and the re-usability of the existing service across the organization rather that duplicating the same.

6. What is the difference between call-template and apply-template?

Call template is almost like calling a function in a traditional programming language.

Apply Template is a little different one but it is the real power of XSLT: It takes any number of XML nodes (whatever you define in the select attribute), iterates them ( apply-templates works like a loop!) and finds matching templates for them.

7. How to change the archive file name in SOA 11g?

By default filename will be written in the format filename_digest_timetamp in archive location.

Setting the below property in jca file will change the format to filename_timetamp.

<property name="UseDigest" value="false"/>

8) What is SOAP and what are the binding protocols available?

Simple object access protocol and it is a protocol specification for the communication happens between the web services over the network and binding protocol is HTTP.

9) What is the difference between Async and Sync activity on wsdl level?

Async wsdl-It has only input messages for the operation and it has 2 operations one for sending the request and other for call back.

Sync wsdl-It has 2 messages input and output messages for the wsdl operation.

10) What is the WSDL structure?

Following are the wsdl structure

definitions

Types

Messages

Operation

Port type

Bindings

Services

Ports

11) What is the significance of target Namespace in a wsdl?

It is the one which uniquely identifies the WSDL and when the WSDL is used it should be identified using its Target Namespace.

12) What is structure of SOAP message?

The structure of a SOAP message: A SOAP message is encoded as an XML document, consisting of an element, which contains an optional element, and a mandatory element. The element, contained within the, is used for reporting errors.

The SOAP envelope-The SOAP is the root element in every SOAP message, and contains two child elements, an optional and a mandatory.

The SOAP header-The SOAP is an optional sub-element of the SOAP envelope, and is used to pass application-related information that is to be processed by SOAP nodes along the message path.

The SOAP body-The SOAP is a mandatory sub-element of the SOAP envelope, which contains information intended for the ultimate recipient of the message.

The SOAP fault-The SOAP is a sub-element of the SOAP body, which is used for reporting errors.

13) Why do we need to have messages in WSDL, aren't operations and types enough to describe the parameters for a web service?

Messages consist of one or more logical parts. Each part is associated with a type from some type system using a message-typing attribute. The set of message-typing attributes is extensible.

The element describes the data being exchanged between the Web service providers and consumers.

Each Web Service has two messages: input and output. The input describes the parameters for the Web Service and the output describes the return data from the Web Service.

Each message contains zero or more parameters, one for each parameter of the Web Service's function.

Each parameter associates with a concrete type defined in the container element. So describing the parameters cannot perform by operations and types this is the main need of Messages.

14) What is a inline schema?

Schemas can be included inside of XML file is called Inline Schemas.

15) What is the difference between xsd:import and xsd:include?

The fundamental difference between include and import is that you must use import to refer to declarations or definitions that are in a different target namespace and you must use include to refer to declarations or definitions that are (or will be) in the same target namespace.

16) What is BAM?

Business Activity Monitoring is a tool that is useful in monitoring business services and processes. It actively collects data, applies rules and reports information to users. When something goes wrong in business processes, BAM can be configured to take corrective measures such as emailing administrators/support team.

17) How to send the data to BAM from SOA?

The Oracle BAM Adapter is a Java Connector Architecture (JCA)-compliant adapter which can be used from a Java EE client to send data and events to the Oracle BAM Server. Oracle BAM Adapter is configured in Oracle Weblogic Server Administration Console to provide any of these connection pools. Oracle BAM Adapter provides three mechanisms by which you can send data to Oracle BAM Active Data Cache from an SOA composite application.

18) What are the ways to publish the data to BAM?

There are two ways to publish the data to BAM

BAM Adapter.

BAM Sensor activity level.

19) What are the roles in BAM?

Architect

Administrator

Active Viewer

Active Studio

20) What is forward delay in JMS Queue?

In the clustered environment where JMS queues are used, when for the queues in any one of the Managed server doesn’t have the consumer, once messages reaches the forward delay time it gets moved to the other managed server where consumer is present.

21) What is redelivery limit in JMS Queue?

When the message gets failed to get processed ,then it will be re-tried will the redelivery limit exhausts and once after the redelivery limit the message can b e either moved to the error Queue are it can be discarded.

22) What is timetodeliver in JMS Queue?

When Messages enqueue to the JMS queue, it will be immediately consumed by the JMS Subscribers, if any delay needs to be induced for the message consuming by the Subscribers then timetodeliver needs to set. The JMS message will not be subscribed until timetodelivery exhausts.

23) Difference between JMS Queues and Topics?

Queue-Message will be subscribed by one subscriber.

Topic-Message will be subscribed by more than one subscriber.

SOA Interview Questions - Part 1

1) What is SOA?

Service Oriented Architecture (SOA) is used to develop Enterprise applications by using a collection of services which communicates each other. Service-Oriented Architecture (SOA) is a set of principles and methodologies for designing and developing software in the form of interoperable services.

2) Principles of SOA?

Loose coupling

Re-usability

Interoperability

Flexible

3) What is the difference between 10g and 11g?

SCA architecture was followed in 11g and not in 10g 

In 11g you can put all your project SOA components in composite.xml file and deploy as a single deployment unit to single server, where in 10g you have to deploy each component to the respective server (i.e. ESB to ESB server, BPEL to BPEL Server)

Basically all the SOA components like BPEL, ESB (Called Mediator in 11g), & OWSM are brought into one place in 11g using SCA composite concept.

The major difference between 10g & 11g would be the app server container. 10g by default runs onOC4J while 11g runs on Web logic Server.

In 10g every BPEL is a separate project, but in 11g several components can make 1 project as SCA.

In 10g consoles are separate for BPEL and ESB, but in 11g Enterprise Manager contains all.

In 10g BAM and business rules are outside SOA Suite, but in 11g they are in SOA Suite.


4) Is Oracle SOA same as Oracle Fusion Middleware?

No because SOA is one of the parts in Fusion middleware and SOA behaves like user interface where as Fusion is big platform

5) What is SCA?

Service Component Architecture (SCA) provides a programming model for building applications and systems based on a Service Oriented Architecture. SCA is a model that aims to encompass a wide range of technologies for service components and for the access methods which are used to connect them.

6) What is the SOA Suite 11g Components?

Oracle Adapters

Oracle Mediator

Business Events and Events Delivery Network

Oracle Business Rules

Human Workflow

Oracle Business Activity Monitoring

Oracle Enterprise Manager

7) What is choreography? How does it differ from orchestration?

In choreography there is no business process to control the integration between the systems; each system will directly integrate with one another in sequence where as in Orchestration there is a business process which controls all the services (source/Target) which is part of the integration.

8) What are the different design patterns in SOA?

Synchronous

Asynchronous Fire and Forget

Asynchronous Delayed Response.

9) In how many ways can a process be deployed?

Using Jdeveloper

Through Enterprise Manger Console

Through Weblogic Scripts.

10) What are dspMaxThread and recieverThread properties? Why are they important?

Receiver Threads property specifies the maximum number of MDBs that process Async across all domains. Whereas the dspMaxThread are the maximum number of MDBs that process Async and threads that operate across a domain. So, we need to ensure that the dspMaxThread value is not greater than Receiver Threads.

11) How does a Async request run in the backend?

The sequences of events involved in the delivery of invoke messages is as follows:

The client posts the message to the delivery service.

The delivery service saves the invocation message to the dlv_message table. The initial state of the message is 0 (undelivered).

The delivery service schedules a dispatcher message to process the invocation message asynchronously.

The dispatcher message is delivered to the dispatcher through the afterCompletion() call. Therefore, the message is not delivered if the JTA transaction fails.

The dispatcher sends the JMS message to the queue. Places a very short JMS message in the in-memory queue (jms/collaxa/BPELWorkerQueue) in OC4J JMS. The small JMS message triggers the Worker Bean in the downstream step.

This message is then picked up by a Worker Bean MDB, which requests the dispatcher for work to execute. If the number of Worker Bean MDBs currently processing activities for the domain is sufficient, the dispatcher module may decide not to request another MDB.

MDB fetches the invocation message from the dispatcher.

MDB passes the invocation message to Oracle BPEL Server, which updates the invocation message state to 1 (delivered), creates the instance, and executes the activities in the flow until a breakpoint activity is reached.

12) How to increase the transaction timeouts in SOA?

For the transaction timeout needs to be increased, all the below settings timeout value needs to be changed to the expected Timeout value.

JTA

Engine Bean

Delivery Bean

13) Is it possible to use MS SQL Server as dehydration store with SOA Suite ?if yes how?

Yes it is possible.

To automatically maintain long-running asynchronous processes and their current state information in a database while they wait for asynchronous callbacks, you use a database as a dehydration store. Storing the process in a database preserves the process and prevents any loss of state or reliability if a system shuts down or a network problem occurs. This feature increases both BPEL process reliability and scalability. You can also use it to support clustering and failover.

14) What is SOA governance? What are its functions?

Service-Oriented Architecture (SOA) governance is a concept used for activities related to exercising control over services in an SOA Some key activities that are often mentioned as being part of SOA governance are:

Managing the portfolio of services: This includes planning development of new services and updating current services.

Managing the service lifecycle: This is meant to ensure that updates of services do not disturb current services to the consumers. Using policies to restrict behavior: Consistency of services can be ensured by having the rules applied to all the created services. Monitoring performance of services: The consequences of service downtime or underperformance can be severe because of service composition. Therefore action can be taken instantly when a problem occurs by monitoring service performance and availability.

15) What is end point virtualization?

Generally a service bus is used for endpoint virtualization and in 11g stack; Oracle Service Bus (OSB) is the primary service bus. In exposed proxy's message flow, it can route the request to any of your environment's actual (physical) service on the basis of whatever logic.

Mediator can also be used to expose the service and in mediator routing rule, it can be routed to actual service.

16) What are DVM's and how are they helpful in SOA?

DVM-Domain Value Map is static mappings between a source and target system which can be used in transformations. The value can be changed via SOA composer.

17) What is the difference between XREF and DVM?

XREF- It is dynamic since the values to the XREF can be populated dynamically and it is stored in XREF_DATA table in SOA Dehydration store.

DVM- Domain Value Map is static mappings between a source and target system which can be used in transformations.

18) What is Dehydration store?

Dehydration store is the database where the instances get stored when it gets dehydrated by the process on the occurrence of non-idempotent activities and also stores the information on the long running processes.

19) What is Decision service?

Oracle SOA Suite provides support for Decision components that support Oracle Business Rules. A Decision component is a mechanism for publishing rules and rule sets as a reusable service that can be invoked from multiple business processes. These rules can be changed without redeploying the code.

20) Why we use BPEL and OSB?

OSB is the light-weight service bus wherever there is not much business logic involves and there is need to just get the message routed between the systems OSB is used where as when there is more business logic involves in the process, then BPEL will be used.

21) What is MDS?

MDS –Metadata Store

Wsdl and Schemas to be used in the process can be published to the MDS and get it used in the code by referring the artifacts from the MDS

Advantages:

JAR (Deployment unit) size will be reduced.

Duplication of the artifacts can be avoided between the services.

22) What is a XA data source? How it differs from a non-XA data source?

An XA transaction involves a coordinating transaction manager, with one or more databases (or other resources, like JMS) all involved in a single global transaction. Non-XA transactions have no transaction coordinator, and a single resource is doing all its transaction work itself (this is sometimes called local transactions).

23) How can we secure our web services using Oracle SOA Suite?

When accessing the services should be restricted to the group,then service should be secured via WSM (Web service Manager).

24) How to deploy an XSL file without deployment of BPEL Process?

We will directly deploy the XSLT, options: -

Using ANT script by file replacement in TMP folder.

By creating a folder in BPEL PM Installation folder and specifying its location in our BPEL code with http call and replacing our xslt to that location.

25) What is HA File and FTP Adapters?

In the clustered environment, File and FTP adapters should be used as HA (High-Availability)

Inbound: It is controlled by Control Files and avoids the race between the manages servers in reading the files where the reference of the files read by the managed servers will be maintained in the control directory.

Outbound: It is controlled by DB Mutex table exist in the SOA dehydration store and this avoids duplicated been written to the same file when all the managed servers in the clusters process the same messages.

26) What is singleton Property in SOA?

In the clustered environment when the processing of the message should happen via only one SOA managed server, then the property singleton needs to be defined at the adapter level.

27) What is a pick activity? Can I have a pick activity with no onMessage branch?

Pick activity picks the messages from service (Source) which has multiple operations or the BPEL process needs to receive the messages from multiple source system. Pick activity should have at least on Message branch.

28) What is a flow activity? What is a flowN activity and how does it leverages the flow activity?

Flow activity is used, when parallel execution of the flow is needed and to use this property “non blocking invoke should be set as true “at the partner link level and no. of execution of parallel flow is defined and static. Where as in Flown the no. of execution of parallel flow is not static and it is determined during run time.

29) What do you mean by non-idempotent activity? Which all activities are non-idempotent by default?

Activities like Pick, Wait, receive, reply and checkpoint() are called non-Idempotent activity and during the execution of the process whenever these activities are encountered then it gets dehydrated to the dehydration store.

30) How can we embed or use a java code in BPEL?

Using JAVA embedding activity in BPEL, Java code can be embedded in BPEL and can be used.

31) How does pick activity differ from a receive activity?

Pick activity can act as a multiple receive activity in some business scenarios. If we have two inbound operations and both can trigger the bpel process then we will go with pick activity as we can’t have two receive activity with create Instance box checked.

32) How can we make a partner link dynamic?

If we have to send the request to different service which has the same wsdl then dynamic partner link will be used and using addressing schema we can set the endpoint dynamic to send the request to the desired service.

33) What is a nonBlockingAll property?

Non- blocking invoke is used when Parallel flow needs to be executed where new thread will be created for each invoke a activity and which will execute simultaneously.

34) What is getPreference property? How do we set it and what advantage it provides?

Hard coding is not a good practice, so to avoid hard coding preference variable can be used and the value of the preference variable is accessed using getPreference().The preference variable value can be changed without re-deploying the code via em console MBean property.

35) How can we improve the performance of an XSL file?

By avoiding use of various if statements and using choose and by using for-each group in place of for-each.

36) How do we handle transactions in BPEL?

Property needs to be defined to start the new transaction or to continue with the same transactions

Property Name: Transaction and if this has value as required then the BPEL process will be continued in the same transaction where as if the value is defined as requiresnew then it will start the new transaction.

37) What are transient and durable BPEL processes?

Durable:-It is long running process and initiated through a one-way invocation and do incur one or more dehydration points in the database during execution Ex: Asynchronous

Transient:-It is short-lived process, request-response style processes and do not incur dehydration during their process execution Ex: Synchronous.

38) When u will go for Sync process?

Whenever the services returns the response in few seconds, it is recommended to go for synchronous BPEL process if not the BPEL process should be Asynchronous the reason is calling application can’t proceed further in case of synchronous process.

39) What is a syncFileRead operation? Is a inbound or a outbound operation? Can my process begin with syncFileRead operation?

When file has to be read in the mid of the BPEL process, then we will use syncFileRead Operation, means some process should initiate the file read process and it is an outbound operation and process can’t begin with Sync File read.

40) Can we use a File Adapter to get a file without reading its content?

Yes, by selecting the Do not read file content check box in the Jdeveloper wizard while configuring the "Read operation."

41) How to increase performance increase in bpel (Db Adapter/file adapter)?

We can increase the performance by writing indexes and sequences.

(Or) Go to application server ----> Configurations -----> Change Xml file

42) Explain error handling in BPEL and what is a error handling framework? How does a error handling framework better than simple error handling in BPEL?

EHF –Whenever any error thrown by the BPEL process/Mediator then EHF will check whether exist in Fault-Bindings.xml files and if so then the action in the Fault-Policy.xml file will be taken and if the action is not found then the fault will the thrown and it will be handled in the catch block.

43) How do we resubmit a faulted process?

Scenario A: The BPEL code uses a fault-policy and a fault is handled using the “ora-human-intervention” activity, then the fault is marked as Recoverable and the instance state is set to “Running”.

Scenario B: The BPEL code uses a fault-policy and a fault is caught and re-thrown using the “ora-rethrow-fault” action, then the fault is marked as Recoverable and the instance state is set to “Faulted”; provided the fault is a recoverable one (like URL was not available).

44) Predefined errors in BPEL?

Custom errors

Timed out errors

BPM errors

Validation Errors

45) What is a throw activity? What it is?

Throw activity will explicitly throw the fault and this fault will get caught by the catch block and the corresponding actions will get executed.

46) What is Web service?

Web services are application components, which are self-contained and self-describing and provide services based on the open protocol communication (i.e. SOAP UI, HTTP over the net).

47) Difference between URI and URL?

A URI is an identifier for some resource, but a URL gives you specific information as to obtain that resource. A URI is a URL and as one commenter pointed out, it is now considered incorrect to use URL when describing applications. Generally, if the URL describes both the location and name of a resource, the term to use is URI. Since this is generally the case most of us encounter every day, URI is the correct term.

48) What is Mediator?

The Mediator is in charge of interconnecting, within an SOA composite application, components that expose different interfaces. In addition, the Mediator can perform duties such as filtering and making routing decisions.

The composite editor in Jdeveloper gives you the flexibility to define the interface now, to choose an existing interface, or to define the interface later as you wire components to the Mediator.

Transforming data from one representation to another is, along with routing, one of the key functions of the Mediator.

49) Difference between ESB and Mediator? 

In 10g for routing, separate router need to keep along with ESB for routing and filter expressions.

Where as in 11g mediator contains routing rules and filter expressions itself.

50) What is the difference between concrete and abstract wsdl?

Concrete: Besides the information about how to communicate to the web service, it the information on where the service exist. It has Bindings (Protocol the message should be sent) and Services(has endpoint for each bindings) .

Abstract: It has information about how to communicate to the web service like types (Schema), Message (input and output messages service accepts) ,Operations (operation that can be performed on this service) and port Type.

Oracle SOA Suite 10g Installation

Oracle SOA:

An Application Architecture that is designed to achieve loose coupling among interacting heterogeneous software applications.

Components of SOA 10g:

The Oracle Soa Suite 10g consists of following components
Oracle BPEL Process Manager
Oracle Enterprise service Bus
Oracle Web Service Manager

Installation of Oracle Soa 10g:

Download SOA Suite from this site

http://www.oracle.com/technology/software/products/ias/htdocs/101310.html

Download Jdeveloper from this site

http://www.oracle.com/technology/software/products/jdev/archives.html
Extract Jdeveloper to any directory (C:/) and in this folder folder u will find Jdeveloper in the shape of coffee cup when u will double click it it provides the environment for the development .In this we need to create certain connections(After SOA Suite is Successfully Installed)
1. Application Server Connection
2. Integration Server Connection
3. Database Connection

The following are the steps for SOA installation :

1. The installation can be done in two ways Basic installation and advanced installation, for advanced installation oracle database 10g is needed. Download oracle database express edition from http://www.oracle.com/technology/software/products/database/xe/index.html

2. For Basic installation Oracle database 10g is not needed SOA itself having Oracle Olite database and it will make use of it.

Difference in Basic and Advanced Installation:

The basic install option allows you little choice in how things are set up. The advanced install gives more options, allowing you to install

· SOA Suite with a web server
· just a web server
· just a J2EE server
· or a web server and J2EE server without SOA Suite

If installing SOA Suite it also requires an external database to act as the repository. When installing SOA Suite it creates two OC4J instances called home and oc4j_soa. The home container will normally run the application server control and Java SSO components. The oc4j_soa instance will have the same components as in the basic install but normally the AS control and the Java SSO will not be active in this instance.The advanced install SOA Suite option also provides the Oracle HTTP Server (OHS) to act as the web server.

Basic Installation:
1. Extract the SOA Suite to any directory and open the folder you will find setup double click on it the command prompt window will appear it will check for the physical storage when it gets success u will get the Oracle universal installer window.

2. Choose the directory where you want to install give and instance name and password as welcome1 and click next .
3. Oracle universal installer install window will appear ,it updates the library click install.
4. Once configuration Assistant completes click Exit.

Advanced Installation:
1. First install Oracle 10g database.
2. Create three schemas in the oracle 10G Database ORABPEL,ORAESB,ORAWSM.
3. Click the Advanced installation instead of Basic installation in the oracle universal installer window and click next.
4. Warning window will be displayed Click yes.
5. Click on J2EE Server,Web Server and SOA Suite installation type in the installation type window and click next.
6. Once again warning window will be displayed ignore this and click OK.
7. In the specify database connection window , it will ask for oracle database 10g Express Edition details,give all the details click next.
8. Give password for ORABPEL,ORAESB,ORAWSM Schemas in the specify database schema password window and click next.
9. In the specify port configuration option window, Select Automatic port and click next.
10. In the administration setting window, giveAdminstration password as welcome1 and give other details and click next.(Ex:As Instance name: SOASuite, click the check box Configure this is an administration oc4j instance).
11. In the next window (Administration Settings), don’t enter anything in this simply click next.
12. Review the summary and click install.
13. Once configuration Assistant completes click Exit.

NOTE: Usually For Installing AIA foundation Pack We will go with Advanced Installation of SOA